How To Adjust The Size Of Potato Strips Or Slices

2016-07-06

When you use potato cutting machine, you may want to know how to adjust the size of the slices or strips of the potato? Now this page will show you how to adjust the size.

One, you need to know that the cutting knives are fixed in a stainless steel box, with fastening bolt installed on one end. The size of the strips is determined by spacers between the blades. To adjust the size, first loosen up the bolt, increase or decrease the spacers to the width you need, and then tighten the bolt.

Two, the thickness of the chips is determined by the spacers underneath the blades. Decrease the spacers behind (on-front; under-behind) the blades if you want thicker slices; increase the spacers in front of the blades if you want thinner ones.

1. After the machine is used for a period, if it whirls less rapidly or less powerfully, check and adjust the tightness of the V-belt.

2. Each time after it finishes operating, clean the knives daub them by edible oil and clean up the waste residue in the whirling bucket.

3. Clean the waste residue discharging slot in time.

4. Check and see if the knives are tight and fasten the screws regularly.

0.0

Message