Fully Automatic External Heating Fryer Low Oil Consumption

The frying lines are all conveyed by mesh belts and can run automatically. Reduce manual operations and improve intelligence.

 

The Oil temperature stable fryer is made of all stainless steel. The mesh belt can adjust the speed at will according to the customer's own needs. Adjust the speed of the mesh belt to control the frying time.

The overall external reinforcement of the external heating frying line draws on advanced technology, and adopts the overall annular reinforcing rib reinforcement to form a whole inside and outside. It can maintain the whole body without deformation for a long time at a high temperature of 200ºC, and the bottom is flat. The bottom slag scraping system runs without omission and dead angle.

This fryer is externally heated. This heating method can ensure that the temperature of the oil is more stable, and the color of the fried snack materials is more uniform. Satisfy customers who have high requirements for frying quality.

 

The heat transfer oil is heated by an external heating device. The heat-conducting oil and edible oil complete the heating work of the edible oil in the heating circulator. The edible oil enters the continuous fryer through the oil pump, and then enters the heating circulator through the oil pump for circulating heating. When the oil temperature reaches the set temperature, the heat-conducting oil No longer enter the heating ring, the oil temperature is lower than the set temperature and enter the exchanger again for heating.

In this way, even if the food is put into the frying equipment, the temperature of the cooking oil will not drop suddenly. Guaranteed quality of finished fried food.

 

Based on the principle of 100% utilization of thermal efficiency and energy saving, this frying line is used by customers. The frying line is generally equipped with an assembly line for use.